Kit Instructions

Please insert all components in the side that has 'The JAM Jar' written on it.....




Step One

Solder in the chip socket as shown in photo with the dimple facing down towards the logo, and the white dot. 

Step Two

Solder in the Black/gold Electrolytic capacitor  C4 100uf with the -/gold line (negative) facing away from the +.

Turn the board over and snip off excess. Be Careful the solder pads are close together!!!

  • YouTube - White Circle
  • Facebook Clean
  • Instagram Clean
  • Twitter - White Circle
© The Jam Jar Amps 2018-2019 
All Rights Reserved